Description

Q 1. Where would you normally use this timber handrail fitting ?
As part of a handrail on a staircase when needing to change from the horizontal plane to a 37 degree incline (most stairs are pitched at 37 degrees).

Q 2. What is it made out of ?
Plantation grown Australian Oak (depending on availability it is either Victorian Ash or Tasmanian Oak).

Q 3. What are the important dimensions ?
Overall : 50mm Diameter turning through 37 degrees.
Both ends have a 16mm Diameter x 35mm Deep hole

Q 4. How do you fix it to the handrail ?
Drill the end of the handrail (with a 16mm drill bit), then using a 16mm multi groove dowel, glue the rail to the pre-drilled bend. A small amount of sanding will be required to blend where they join.

Q 5. How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
Speak to your local paint retailer for more info.