Description

Q 1. Where would you normally use a timber handrail fitting ?
As part of a handrail when needing to turn a 90 degree corner or wanting to return towards the wall.

Q 2. What is it made out of ?
Plantation grown Australian Oak (depending on availability it is either Victorian Ash or Tasmanian Oak).

Q 3. What are the important dimensions ?
Overall : 50mm Diameter turning through 90 degrees with an internal radius of 110mm
Both ends have a 16mm Diameter x 35mm Deep hole

Q 4. How do you fix it to the handrail ?
Drill the end of the handrail (with a 16mm drill bit), then using a 16mm multi groove dowel, glue the rail to the pre-drilled bend. A small amount of sanding will be required to blend where they join.

Q 5. How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
Speak to your local paint retailer for more info.

 
PLEASE NOTE : When ordering the handrail, add up the total number of metres you require then round it up to the nearest metre and use this figure as the quantity to order. 

SOLD PER METER