Description

Deck Protect® WPC Refresh is a solvent based UV resistant stain designed
for internal and external composite wood surfaces to produce a rich natural
light fast transparent look. Product will rejuvenate aged, colour reduced,
stained, or marked composite wood. WPC Refresh is designed to be applied by
rag, lambs wool applicator, brush or spray applied delivering rich uniform
natural looking colours, whilst being fade resisting when exposed to direct
sunlight. WPC Refresh is designed to be over coated with a minimum of 2
coats of Deck Protect® WPC Sealer Gloss or Matt prior to walking on the
decking.

FOR USE ON
– Composite decking, hand rails, walkways, ramps, steps, screening, gates,
furniture. In fact any composite structure new or seasoned, coated or
uncoated.

COLOUR
– Sahara

APPLICATION
– Rag, lambs wool applicator, brush or spray applied.

No. OF COATS
– 1

DRY TIME
– 2 – 4 hours depending on application process and may take up to 12 hours
with excessive film build and lower temperatures.

TOPCOAT
– WPC Clear Sealer must be applied after sufficient dry time has been
allowed. Do not apply the Sealer if the WPC Refresh is wet.

SPREAD RATE
Up to 25m² per Litre depending on the application process.

CONTAINER SIZE
– 4 Litre

CLEAN UP
– Mineral Turpentine