Description

Q 1. Where would you normally use a treated timber fretwork spindle ?
As part of the fretwork (normally under the fascia board) on a verandah or gazebo.

Q 2. What is it made out of ?
Plantation grown Radiata Pine that has been H3 treated (suitable for above ground use).

Q 3. What are the important dimensions ?
Overall : 150mm Height (not including 15mm long x 13mm diameter pins on each end) x 32mm Diameter

Q 4. How should you finish it ?
We recommend that you use an oil based primer to seal the timber, then at least 2 coats of an oil based top paint in your desired colour to finish. Leaving it unfinished, oiling it or using a clear lacquer is not recommended. We highly recommend that you speak to your local paint retailer for more information.