Q 1. Where would you normally use a treated timber verandah bracket ?
As a decorative corner piece (between a post and fascia board), used perhaps on a verandah or pergola.
Q 2. What is it made out of ?
Plantation grown Radiata Pine that has been H3 treated (suitable for above ground use).
Q 3. What are the important dimensions ?
Overall : 360mm Height x 360mm Width x 32mm Depth
Q 4. How should you finish it ?
We recommend that you use an oil based primer to seal the timber, then at least 2 coats of an oil based top paint in your desired colour to finish. Leaving it unfinished, oiling it or using a clear lacquer is not recommended. We highly recommend that you speak to your local paint retailer for more info.