Klevaklip Multi Purpose Support Kit MPS

Description

Klevaklip Multi Purpose Support “Kit” MPS

Provides a bottom of Bearer/Joist from 90 mm-150 mm off ground

The KlevaKlip Multi purpose support (MPS) has been designed as a mid-sized support to cater for the “gap” in the market for decks that are a bit too high for our “Adjustable joist support” and a bit too low for our “Adjustable bearer support”.

The Multi Purpose Support has excellent adjustability, along with the strength and versatility to be used with either bearer or joist combinations, or with joists on their own. Coming in a “kit” form, it is efficiently packaged and quick and easy to assemble. All parts are fully hot dip galvanised.

The MPS can be used either with a bearer or joist combination (conventional deck building), or with just larger sized joists (eg 90, 140 or 190mm) when space or practicality does not permit a standard bearer or joist combination.

Height Levels: 

Minimum Height with Locking Nut – 100mm

Minimum Height without Locking Nut – 90mm

Maximum Deign Height – 150mm

Span requirements (should be taken in conjunction with your timber span tables as timber spans are often your limiting factor):

– For 2.5 kPa rated decks, you must have a minimum of one MPS per every 1.8 square metres spread evenly across your deck.

– For 4.0 kPa rated decks, you must have a minimum of one MPS per every 1.35 square metres spread evenly across your deck.

**NOTE: To Achieve Klevaklip Multi Purpose (MPS) Load Ratings, it is essential that MPS is fixed at both fixing points on the base bracket

Q1. How many Multi Purpose MPS do I get in a box?

There are 8 units per box supplied.